A Beginner's Guide to Operating a Cup Sealing Machine

Introduction

However, cup sealing machines are relatively easy to use, but if you are new and trying cup sealers, it might give some trouble. As we all know this is a bit tricky initially for some beginners. So they created this guide on using a cup sealing machine with an easy step-by-step explanation. In this guide, you learn exactly what to do (with plenty of real-life examples and best practices sprinkled in). 

A. Cup Sealing Machine What is a Cup Sealing Machine 

Cup sealing machine seals a cup with plastic film creating a seal that ensures a tight fit preferably to make sure the drink is fresh and secured It heats and fuses the plastic film with the rim of the cup. The machine creates a vacuum because and when you turn on the machine, it pushes down in a way that it is sealed tightly so that no air is wasted. First, before you can begin using your cup sealing machine, you have to make sure you have all the appropriate items you need such as cup, and the plastic film covering that will wrap around them. 

Seal Those Cups — Complete Step-by-Step Guide 

Put your drink of choice in the cups (I know you're gonna do it anyways) Step 1 Don't pour it too much into cups. Leave a little bit of headspace at the top so you can close the cups without spilling all over the place. 

Now place the sheet of plastic film over top the cups. The plastic film should be tightly wrapped around the mouth of each cup. That later will leave you a nice seal. 

Step 3: Now you will want to set the caps onto the sealing part of the machine, so that the cups you heal have covered. Make sure they sealed in the middle of sealing platform. That kind of stuff matters because it makes sure your every single cup will be sealed uniformly. 

After pressing the sealing handle down. That causes the inside of the machine to turn up the heat. The plastic film will then be melted with heat to stick to the cups. However, you might want to lift the handle only after keeping it for some seconds to ensure good sealing has been done. 

At last, detach the container away from the sealing surface. At this stage you can always add a straw to your drink to sip on it more easily if you wish. 

Maintaining Your Cup Sealing Machine, the Right Way 

The proper Maintenance of cup sealing machine is the most important aspect in order to keep your cup sealing machine in good working condition for many years. Here are some tips to ensure your machine stays in peak condition: 

Regular Maintenance of Your Machine — You should have a habit to clean your cup sealing machine on regular basis. Use a damp towel to wipe the sealing area and handles to remove any spills or dirt. 

Check for things left behind: Never operate the machine with particle or liquid residue on the sealing area. So every time, you will be sure that you will have a sealed clean. 

Trust the maker: Follow the manufacturers care instructions for your cup sealing machine and follow it! This should demonstrate how to maintain it properly. 

If you are aware that any part of the machine is not working properly or it is worn out, you must replace that particular part at once. This will also guarantee your machine works properly and efficiently. 

Store it away: Once you are done using your cup sealing machine, store it somewhere dry and safe. This will also help protect it against severe destruction.